首页
登录
职称英语
How many are there quality control inspection points? [br] [originaltext]Part F
How many are there quality control inspection points? [br] [originaltext]Part F
游客
2025-05-16
2
管理
问题
How many are there quality control inspection points? [br]
Part Four. Questions 23 to 30.
You will hear a conversation about quality control.
For each question 23-30 , mark one letter (A, B or C) for the correct answer.
After you have listened once , replay the recording.
You now have 45 seconds to read through the questions.
[pause]
Now listen , mark A , B, or C.
M: Could you tell me a bit about quality control at the factory?
W: Well, there are four main quality control inspection points. We begin by visiting our suppliers to make sure we are happy with their quality control. Next, we inspect all goods on arrival at our factory and the third inspection point is during production. And the last stage is chemical analysis of our finished goods.
M: And what do you look for at each of the four inspection points?
W: Well each stage is different. With our suppliers, for instance, we inspect their quality control processes and, even more importantly, their factory hygiene. If we’re not happy with their hygiene, we’ll cancel the supply contract. As the goods is in stage, we make sure that order quantities are correct and the quality is OK. We also check the transport packaging. If the packing is damaged, the warehouse shelf-life can be reduced.
M: And what quality checks do you run during production?
W: We take samples to check there isn’t too much cooking oil on the snack and that each snack has the minimum amount of flavouring. We also check the size of the snacks and their crispness. If the snacks are too oily, they go soft.
M: So that leaves the finished goods. What do you check for at the final quality control stage?
W: We check individual bags to make sure that the packet weight is above the acceptable minimum and that the packet is sealed properly. We also check the taste.
M: And how do you do that?
W: Well, we eat them. How else? We also do chemical analysis to check things like fat levels and other information that we have to put on the packets.
[pause]
Now listen to the recording again.
[pause]
That is the end of Part Four. You now have ten minutes to transfer your answers to your Answer Sheet.
[pause]
选项
A、Visiting suppliers.
B、During production.
C、Chemical analysis.
答案
C
解析
题干意为:质检最后阶段。原文信息:The final stage is chemical analysis of ourfinished goods。故选C。
转载请注明原文地址:https://www.tihaiku.com/zcyy/4078359.html
相关试题推荐
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[originaltext]PartOne.Questions1to8.Forquestions
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
随机试题
[originaltext]Moderator:Goodevening,everyone!It’sagreathonorofus
GrowPlantsWithoutWater[A]Eversincehumanitybegan
公路工程计量规则中第300章为()。A.路基工程的计量 B.路面工程的计
A.pH下降 B. C.两者均有 D.两者均无肾衰竭()
以分馆制的形式建立的流动图书馆,省、市级图书馆对其实行以下几个方面的统一管理:(
二氧化碳在防灭火实践工作中起到了良好的效果,主要是因为( )。A.二氧化碳吸附
从钢筋外型看,属于带肋钢筋的有()。A.HPB300 B.HRB400
下列选项中,关于贯标工作的组织步骤实施描述不正确的是( )。A.质量管理体系运
呃逆病机关键在于A.气郁痰阻 B.胃气上逆 C.气机郁滞 D.胃失和降
投标单位的投标报价应按招标单位提供的工程量清单的每一单项计算填写单价、合价,在开
最新回复
(
0
)