首页
登录
职称英语
How many are there quality control inspection points? [br] [originaltext]Part F
How many are there quality control inspection points? [br] [originaltext]Part F
游客
2025-05-16
21
管理
问题
How many are there quality control inspection points? [br]
Part Four. Questions 23 to 30.
You will hear a conversation about quality control.
For each question 23-30 , mark one letter (A, B or C) for the correct answer.
After you have listened once , replay the recording.
You now have 45 seconds to read through the questions.
[pause]
Now listen , mark A , B, or C.
M: Could you tell me a bit about quality control at the factory?
W: Well, there are four main quality control inspection points. We begin by visiting our suppliers to make sure we are happy with their quality control. Next, we inspect all goods on arrival at our factory and the third inspection point is during production. And the last stage is chemical analysis of our finished goods.
M: And what do you look for at each of the four inspection points?
W: Well each stage is different. With our suppliers, for instance, we inspect their quality control processes and, even more importantly, their factory hygiene. If we’re not happy with their hygiene, we’ll cancel the supply contract. As the goods is in stage, we make sure that order quantities are correct and the quality is OK. We also check the transport packaging. If the packing is damaged, the warehouse shelf-life can be reduced.
M: And what quality checks do you run during production?
W: We take samples to check there isn’t too much cooking oil on the snack and that each snack has the minimum amount of flavouring. We also check the size of the snacks and their crispness. If the snacks are too oily, they go soft.
M: So that leaves the finished goods. What do you check for at the final quality control stage?
W: We check individual bags to make sure that the packet weight is above the acceptable minimum and that the packet is sealed properly. We also check the taste.
M: And how do you do that?
W: Well, we eat them. How else? We also do chemical analysis to check things like fat levels and other information that we have to put on the packets.
[pause]
Now listen to the recording again.
[pause]
That is the end of Part Four. You now have ten minutes to transfer your answers to your Answer Sheet.
[pause]
选项
A、quantities are correct.
B、quality is OK.
C、A and B.
答案
C
解析
原文信息:At the goods is in stage,wemake sure that order quantities are correct andthe quality is OK.即要保证数量正确和质量合格两项。故选C。
转载请注明原文地址:https://www.tihaiku.com/zcyy/4078361.html
相关试题推荐
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[originaltext]PartFour.Q
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[originaltext]PartOne.Questions1to8.Forquestions
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
随机试题
I’llstartmylecturebytellingyoua【B1】______.Ayoungwomanfrom【B2】____
Ⅰ.Urbanproblems1)problemstobothdevelopedanddevelopingcountri
SomeNotesonGender-NeutralLanguageGeneral
Isscienceinfinite?Canitkeepgivingusprofoundinsightsintotheworld
Itwasamiraclethathe__________(在半年前的空难中幸存).survivedtheaircrashhalfayea
下列说法中正确的是()。A.房间的平面尺寸较大时,应用板式楼板。B.井字楼板
A.胎先露部下降受阻 B.子宫瘢痕 C.子宫对宫缩剂过于敏感 D.手术创伤
A.敏感度 B.准确度 C.灵敏度 D.稳定度 E.特异度床边试验(PO
溶菌酶对革兰阴性菌的杀菌作用弱,是因为革兰阴性菌A.有外膜B.无肽聚糖C.细胞壁
Thechangeinthatvillagewasmiraculou
最新回复
(
0
)