CDMA for cellular systems can be describ

考试题库2022-08-02 48

问题 CDMA for cellular systems can be described as follows. As with FDMA, each cell is Allocated a frequency （　　），which is split into two parts; half for reverse (mobile unit to base station) and half for（　　）(base station to mobile unit). For full-duplex（　　）, a mobile unit uses both reverse and forward channels. Transmission is in the form of direct-sequence spread（　　）which uses a chipping code to increase the data rate of the transmission, resulting in an increased signal bandwidth.Multiple access is provided by assigning（　　）chipping codes to multiple users, so that the receiver can recover the transmission of an individual unit from multiple transmissions.问题1选项A.waveB.signalC.bandwidthD.domain问题2选项A.forwardB.reverseC.backwardD.ahead问题3选项A.connectionB.transmissionC.compromiseD.communication问题4选项A.structureB.spectrumC.streamD.strategy问题5选项A.concurrentB.orthogonalC.higherD.lower

选项

答案 CADBB

解析用于蜂窝系统的CDMA技术可以描述如下。就像FDMA一样，每一个小区被分配了一个频带，该频带划分为两半，一半用于反向信道（从移动终端到基站），一半用于正向信道（从基站到移动终端）。在全双工通信中，移动终端使用了反向和正向两个信道。传输以直接序列扩频方式进行，用一个码片来增加传输的数据速率，同时也产生了额外的信号带宽。通过把正交的各个码片指定给不同的用户就可以实现多路访问，这样接收者就能够从多个传输中提取并恢复需要的传输单元。

转载请注明原文地址:https://www.tihaiku.com/congyezige/2405472.html

本试题收录于：中级网络工程师题库软件水平考试初中高级分类

中级网络工程师

软件水平考试初中高级

相关试题推荐

随机试题

最新回复(0)

CDMA for cellular systems can be describ

中级网络工程师

软件水平考试初中高级

Insoftwareengineeringandsystemsengi