首页
登录
职称英语
By the 1820s in the United States, when steamboats were common on western wa
By the 1820s in the United States, when steamboats were common on western wa
游客
2025-04-27
3
管理
问题
By the 1820s in the United States, when steamboats were common on western waters, these boats were mostly powered by engines built in the West (Pittsburgh, Cincinnati, or Louisville), and of a distinctive western design specially suited to western needs. The first steam engines in practical use in England and the United States were of low-pressure design. This was the type first developed by James Watt, then manufactured’ by the firm of Boulton and Watt. Steam was accumulated in a large, double-acting vertical cylinder, but the steam reached only a few pounds of pressure per square inch. It was low-pressure engines of this type that were first introduced into the United States by Robert Fulton. He imported such a Boulton and Watt engine from England to run the Clermont. But this type of engine was expensive and complicated, requiring many precision-fitted moving parts. The engine that became standard on western steamboats was of a different and novel design. It was the work primarily of an unsung hero of American industrial progress.
Oliver Evans (1755—1819) was the self-educated son of a Delaware farmer. Evans early became obsessed by the possibilities of mechanized production and steam power. As early as 1802 he was using a stationary steam engine of high-pressure design in his mill. Engines of this type were not unknown, but before Evans they were generally considered impractical and dangerous. Within a decade the high-pressure engine, the new type had become standard on western waters. Critics ignorant of western conditions often attacked it as wasteful and dangerous. But people who really knew the Ohio, the Missouri, and the Mississippi insisted, with good reasons, that it was the only engine for them. In shallow western rivers the weight of vessel and engine was important; a heavy engine added to the problem of navigation. The high-pressure engine was far lighter in proportion to horsepower, and, with less than half as many moving parts, was much easier and cheaper to repair. The main advantages of low-pressure engines were safe operation and economy of fuel consumption, neither of which meant much in the West. (354 words) [br] What is the passage mainly about?
选项
A、Steamboat engines in the western United States.
B、River travel in the western world.
C、The first steamboat engine was invented by Oliver Evans.
D、The world’s first practical steamboat.
答案
A
解析
本篇讲述的是Oliver Evans如何把英国已有的蒸汽发动机改造成一种非常适合美国西部河流特色的蒸汽发动机。
转载请注明原文地址:https://www.tihaiku.com/zcyy/4056394.html
相关试题推荐
Bythe1820sintheUnitedStates,whensteamboatswerecommononwesternwa
Bythe1820sintheUnitedStates,whensteamboatswerecommononwesternwa
Theappealtothesensesknownas______isespeciallycommoninpoetry.A、imagin
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
CollegesportsintheUnitedStatesareahugedeal.AlmostallmajorAmeric
随机试题
[originaltext]Todaywecontinueourseriesonecologyandconservationwith
Electronicmailhasbecomeanextremelyimportantandpopularmeansofcommu
嵌入式系统对应用软件的开发和编程语言的选择提出了不同的要求。以下所考虑的一些因素
利用身长观测图观察儿童体重增长趋势采用的方法是:( )A.等级评价法 B.曲
某土方工程计划累计完成工程量的S曲线如下图所示,1~4天每天实际完成工程量分别为
土方体积可采用平均断面积法计算,但与似棱体公式计算结果比较,如果误差超过()时,
根据《宪法》的规定,下列权利属于公民的政治自由的是()。A.言论自由 B.出
房地产经纪业是以()为主要资源的服务业。A.人力 B.财力 C.信息 D
粉末直接压片最适于A.较稳定,遇湿热不起变化,但可压性和流动性较差的药物B.较不
银行承兑汇票的承兑银行,应当按照票面金额向出票人收取()的手续费。A:千分之一
最新回复
(
0
)