首页
登录
职称英语
On 2nd August 1999, a particularly hot day in the town of Cirencester in
On 2nd August 1999, a particularly hot day in the town of Cirencester in
游客
2024-08-13
19
管理
问题
On 2nd August 1999, a particularly hot day in the town of Cirencester in the UK, a large pane of toughened glass in the roof of a shopping center at Bishops Walk shattered without warning and fell from its frame.When fragments were analyzed by experts at the giant glass manufacturer Pilkington, which had made the pane, they found that minute crystals of nickel sulphide trapped inside the glass had almost certainly caused the failure.
"The glass industry is aware of the issue, " says Brian Waldron, chairman of the standards committee at the Glass and Glazing Federation, a British trade association, and standards development officer at Pilkington.But he insists that cases are few and far between."It’ s a very rare phenomenon, " he says.
Others disagree."On average I see about one or two buildings a month suffering from nickel sulphide related failures, " says Barrie Josie, a consultant engineer involved in the Bishops Walk investigation.Other experts tell of similar experiences.Tony Wilmott of London-based consulting engineers Sandberg, and Simon Armstrong at CladTech Associates in Hampshire both say they know of hundreds of cases."What you hear is only the tip of the iceberg, " says Trevor Ford, a glass expert at Resolve Engineering in Brisbane, Queensland.He believes the reason is simple: "No-one wants bad press."
Toughened glass is found everywhere, from cars and bus shelters to the windows, walls and roofs of thousands of buildings around the world.It’ s easy to see why.This glass has five times the strength of standard glass, and when it does break it shatters into tiny cubes rather than large, razor-sharp shards.Architects love it because large panels can be bolted together to make transparent walls, and turning it into ceilings and floors is almost as easy.
It is made by heating a sheet of ordinary glass to about 620°C to soften it slightly, allowing its structure to expand, and then cooling it rapidly with jets of cold air.This causes the outer layer of the pane to contract and solidify before the interior.When the interior finally solidifies and shrinks, it exerts a pull on the outer layer that leaves it in permanent compression and produces a tensile force inside the glass.As cracks propagate best in materials under tension, the compressive force on the surface must be overcome before the pane will break, making it more resistant to cracking.
The problem starts when glass contains nickel sulphide impurities.Trace amounts of nickel and sulphur are usually present in the raw materials used to make glass, and nickel can also be introduced by fragments of nickel alloys falling into the molten glass.As the glass is heated, these atoms react to form tiny crystals of nickel sulphide.Just a tenth of a gram of nickel in the furnace can create up to 50,000 crystals.
These crystals can exist in two forms: a dense form called the alpha phase, which is stable at high temperatures, and a less dense form called the beta phase, which is stable at room temperatures.The high temperatures used in the toughening process convert all the crystals to the dense, compact alpha form.But the subsequent cooling is so rapid that the crystals don’ t have time to change back to the beta phase.This leaves unstable alpha crystals in the glass, primed like a coiled spring, ready to revert to the beta phase without warning.
When this happens, the crystals expand by up to 4%.And if they are within the central, tensile region of the pane, the stresses this unleashes can shatter the whole sheet.The time that elapses before failure occurs is unpredictable.It could happen just months after manufacture, or decades later, although if the glass is heated—by sunlight, for example—the process is speeded up.Ironically, says Graham Dodd of consulting engineers Arup in London the oldest pane of toughened glass known to have failed due to nickel sulphide inclusions was in Pilkington’s glass research building in Lathom, Lancashire.The pane was 27 years old.
Data showing the scale of the nickel sulphide problem is almost impossible to find.The picture is made more complicated by the fact that these crystals occur in batches.So even if, on average, there is only one inclusion in 7 tonnes of glass, if you experience one nickel sulphide failure in your building, that probably means you’ ve got a problem in more than one pane.Josie says that in the last decade he has worked on over 15 buildings with the number of failures into double figures.
One of the worst examples of this is Waterfront Place, which was completed in 1990.Over the following decade the 40-storey Brisbane block suffered a rash of failures.Eighty panes of its toughened glass shattered due to inclusions before experts were finally called in.John Barry, an expert in nickel sulphide contamination at the University of Queensland, analyzed every glass pane in the building.Using a studio camera, a photographer went up in a cradle to take photos of every pane.These were scanned under a modified microfiche reader for signs of nickel sulphide crystals."We discovered at least another 120 panes with potentially dangerous inclusions which were then replaced," says Barry."It was a very expensive and time-consuming process that took around six months to complete." Though the project cost $1.6 million (nearly£700, 000), the alternative—re-cladding the entire building—would have cost ten times as much.
Toughened glass is favored by architects because it is much stronger than ordinary glass, and the fragments are not as 【R1】__________ when it breaks.However, it has one disadvantage: it can shatter 【R2】__________.This fault is a result of the manufacturing process.Ordinary glass is first heated, then cooled very 【R3】__________.The outer layer 【R4】__________ before the inner layer, and the tension between the two layers which is created because of this makes the glass stronger.However, if the glass contains nickel sulphide impurities, crystals of nickel sulphide are formed.These are unstable, and can expand suddenly, particularly if the weather is 【R5】__________.If this happens, the pane of glass may break.The frequency with which such problems occur is disputed by glass experts.Furthermore, the crystals cannot be detected without sophisticated equipment. [br] 【R2】
选项
答案
unexpectedly
解析
由关键词“shatter”定位至原文第七段第三句“The time that elapses before failure occurs is unpredictable.”即“破裂时间无法预测(unpredictable)…。”由于空缺处前shatter为动词,须用副词修饰动词,故本空填“unexpectedly”。
转载请注明原文地址:https://www.tihaiku.com/zcyy/3718604.html
相关试题推荐
Manypeople,particularlyrecentcollegegraduates,dreamofowningtheirow
Manypeople,particularlyrecentcollegegraduates,dreamofowningtheirow
Thesecondreportwas______byAugust2005,butoneyearlateritwasstillnowhe
InAugust2008,athletesfromtheUnitedStatesandaroundtheworldwillco
InAugust2008,athletesfromtheUnitedStatesandaroundtheworldwillco
InAugust2008,athletesfromtheUnitedStatesandaroundtheworldwillco
InAugust2008,athletesfromtheUnitedStatesandaroundtheworldwillco
Manypeople,particularlyrecentcollegegraduates,dreamofowningtheirow
Manypeople,particularlyrecentcollegegraduates,dreamofowningtheirow
WhatoccursonceinJune,onceinJulybuttwiceinAugust?TheletterU.(由单词June
随机试题
______,theguestspeakerwasusheredintotheauditoriumhalltogivethelectu
在业主单位招标管理阶段,BIM技术应用主要体现在哪几个方面?()A.数据共享
结核菌素试验阳性反应"++"是指A.注射局部发红 B.局部有红色硬结 C.红
前尿道结石的治疗,最常用的方法是()。A.多饮水、运动排石 B.体外震波碎石
一个好的、应用于人员选拔和配置的( )无疑应该能够准确地测量到所要测量的心理属
引起原发性肾病综合征的常见肾小球疾病有 A.膜型肾炎B.膜增殖型肾炎C.Ig
不同层次的管理者一般对各种技能要求程度不同,但()对大家同等重要。A.技术技能
下列税务处理中,符合个人独资企业所得税相关规定的有()。A.个人独资企业发
在施工过程中,为了加快施工进度,施工单位可采取的技术措施包括()A、采用更先进的
(2017年真题)项目安全管理的第二类危险源控制中,最重要的工作是()。A.加
最新回复
(
0
)