首页
登录
职称英语
[originaltext] To extinguish different kinds of fires, several types of fire
[originaltext] To extinguish different kinds of fires, several types of fire
游客
2024-03-05
7
管理
问题
To extinguish different kinds of fires, several types of fire extinguishers have been invented. They must be ready for immediate use when fire breaks out. Most portable kinds operate for less than a minute, so they are useful only on small fires. The law requires ships, trains, buses and planes to carry extinguishers.
Since fuel, oxygen and heat must be present in order for fire to exist, one or more of these things must be removed or reduced to extinguish a fire. If the heat is reduced by cooling the material below a certain temperature, the fire goes out. The cooling method is the most common way to put out a fire. Water is the best cooling material because it is low in cost and easy to get.
Another method of extinguishing fire is by cutting off the oxygen. This is usually done by covering the fire with sand, steam or some other things. A blanket may be used to cover a small fire.
A third method is called separation, which includes removing the fuel, or material easy to burn, from a fire, so that it can find no fuel.
The method that is used to put out a fire depends upon the type of fire. Fires have been grouped in three classes. Fires in wood, paper, cloth and the like are called Class A fires. These materials usually help keep the fire on. Such fires can be stopped most readily by cooling with water.
选项
A、Another class of fires.
B、Another type of extinguishers.
C、How fires break out.
D、How fires can be prevented.
答案
A
解析
What would the author probably discuss in the paragraph that follows?
转载请注明原文地址:https://www.tihaiku.com/zcyy/3507216.html
相关试题推荐
[originaltext]Collegeismorethanstudyingtogetadiploma.Readings,hom
[originaltext]Collegeismorethanstudyingtogetadiploma.Readings,hom
[originaltext]Theworld’sfirstgunmadewith3Dprintertechnologyhasbee
[originaltext]Theworld’sfirstgunmadewith3Dprintertechnologyhasbee
[originaltext]W:Hello,Sam.ThisisPaulaHandson.Sorrytobotheryou.ButI’
[originaltext]W:Hello,Sam.ThisisPaulaHandson.Sorrytobotheryou.ButI’
[originaltext]W:Hello,Sam.ThisisPaulaHandson.Sorrytobotheryou.ButI’
[originaltext]W:Goodeveningandwelcometoourprogram.Today,we’lltalkabo
[originaltext]W:Goodeveningandwelcometoourprogram.Today,we’lltalkabo
[originaltext]Fromfieldstudiestolaboratorystudies,weseethatwinning
随机试题
Nuclearpowerisdangeroustohealth,safetyandevenlifeitself.Thedange
下列选项中不属于BIM模型生产工程师岗位职责的是()。A.场地模型建立 B.钢
在下面网络图中,节点4的最早开始时间是(),关键路径是(请作答此空)。 A.
请根据《公路桥梁技术状况评定标准》(JTG/TH21-2011)对某单跨箱板拱桥
女性,46岁。因全身骨密度降低,多发肾结石而就诊。实验室检查血钙升高。诊断首先要
女孩,7岁,低热月余,双膝关节酸痛,出汗,乏力。检查,面色苍白,躯干可见散在红色
单项资产的风险衡量环节包括( )。A.确定概率分布 B.计算期望报酬率 C
以下影响工程质量的因素中,属于工程技术环境因素的有()。A.水文、气象 B
无卤低烟阻燃电缆在消防灭火时的缺点是()。A.发出有毒烟雾 B.产生烟尘
支气管假复层纤毛柱状上皮变为鳞状上皮的过程是A:变性 B:机化 C:增生
最新回复
(
0
)