首页
登录
职称英语
The earliest process of making paper was done almost 5,000 years ago in Egyp
The earliest process of making paper was done almost 5,000 years ago in Egyp
游客
2023-06-29
45
管理
问题
The earliest process of making paper was done almost 5,000 years ago in Egypt and the Nile Valley. In those days, paper was made from strips of the papyrus plant.
Modern paper-making began in China about 2,000 years ago. This process produced paper from cloth, straw, wood or the bark of trees. The raw materials are struck over and over until they become loose. Then they are mixed with water.
After the water has been removed, the flat, thin form remaining is permitted to dry. This becomes a sheet of paper.
Large machines started to be used for making paper near the end of the 16th century. Today, paper-making is a big business. But it is still possible to make paper by hand, since the steps are the same as using big machines.
You should choose paper with small amounts of printing. Old envelopes are good for this reason. Colored paper also can be used, as well as small amounts of newspaper. Small pieces of rags or cloth can be added. These should be cut into pieces about 5 centimeters by 5 centimeters.
Everything is placed in a container, covered with water, and brought to a boil. It is mixed for about 2 hours with some common chemicals and then allowed to cool. Then it is left until most of the water dries up. The substance left, called pulp, can be stored until you are ready to make paper.
When you are ready, the pulp is mixed with water again. Then the pulp is poured into a special box or mold. The mold is made of small squares of wire that hold the shape and thickness of the paper. To help dry the paper, the mold lets the water flow through the small wire squares.
After several more drying steps, the paper is carefully lifted back from the mold. It is now strong enough to be touched.
The paper is smoothed and pressed to remove trapped air. You can use a common electric iron used for pressing clothes. [br] The passage is most probably intended to _____.
选项
A、introduce the history of paper-making
B、describe the process of paper-making
C、compare the ancient and the modern paper-making
D、argue the possibility of paper-making by hand
答案
B
解析
前4段介绍了造纸术的发展,第5段至最后一段描述了造纸的步骤,据第4段的最后一句的But…可知作者强调的是造纸的步骤,因此,本文主要是为了介绍造纸的过程,故选B。D很具干扰性,the possibility of paper-making by hand在第4段最后一句提到,但是作者在本文并没有为任何观点而argue,全文的语气是描述性的,因此,D不正确。
转载请注明原文地址:https://www.tihaiku.com/zcyy/2791966.html
相关试题推荐
[originaltext](5)Egyptianofficialsaremakingplanstoopenanewly-expan
[originaltext](5)Egyptianofficialsaremakingplanstoopenanewly-expan
Theearliestprocessofmakingpaperwasdonealmost5,000yearsagoinEgyp
Theearliestprocessofmakingpaperwasdonealmost5,000yearsagoinEgyp
Theearliestprocessofmakingpaperwasdonealmost5,000yearsagoinEgyp
Theearliestprocessofmakingpaperwasdonealmost5,000yearsagoinEgyp
Theearliestprocessofmakingpaperwasdonealmost5,000yearsagoinEgyp
FormanypeopleintheU.S.,sportsarenotjustforfun.Theyarealmosta
FormanypeopleintheU.S.,sportsarenotjustforfun.Theyarealmosta
FormanypeopleintheU.S.,sportsarenotjustforfun.Theyarealmosta
随机试题
TheremustbemoreChinesestaffatUNESCOin2019thanin2018ifthequotais
You’vebeenworkingoutregularlyforquiteawhile,butyou’renowherene
常见的火源有七种类型,电器开关开启或关闭时发出的火花属于()。A.明火焰 B
放大镜的放大倍数越高,放大镜的视野越大。()
9个月婴儿,发热3天,烦躁、流涎1天。查体:一般状态可,前囟平坦,咽部充血,咽峡
关节面面积差的大小是影响关节运动幅度的关键因素,关节面面积差最大的关节是()
对于信托(契约)型基金来讲,基金合同当事人订立基金合同应遵循的原则不包括()。
李某将张某的房产卖给王某,订立合同后经张某追认取得了处分权,则(
利用计算机监控系统实现防误闭锁功能时,应有符合现场实际并经运维管理单位审批的(_
依据《注册监理工程师管理规定》,注册监理工程师可以从事()等业务。A、工程监理
最新回复
(
0
)